When designing and laying pipes, pay attention to the following matters:
A. Reasonable selection of the diameter of the pipeline, the diameter of the pipeline, the speed of the liquid flow at the same flow, the small liquid flow, the small resistance loss, but the high price and the small diameter of the pipeline will lead to a sharp increase in resistance. Increased power, cost and operating costs increase. Therefore, we should comprehensively consider from the perspective of technology and economy.
B. The maximum pressure on the discharge pipe and its pipe joints should be considered.
C. The layout of the pipeline should be arranged as a straight pipe as much as possible, minimizing the attachments in the pipeline and shrinking the length of the pipeline. When you must turn, the curved radius of the elbow should be 3 to 5 times the diameter of the pipeline. ℃.
D. The discharge side of the pump must be installed with valve (ball valve or deeper valve, etc.) and inverse valve. The valve is used to regulate the working point of the pump. The inverse valve can prevent the pump reversal when the liquid is flowing, and the pump can avoid the blow of the water hammer. (When the liquid flows back, it will cause huge reverse pressure to damage the pump
Contact Ruite pump to get the best pump selection sulution
Email: rita@ruitepump.com
web: www.ruitepumps.com
whatapp: +8619933139867
Post time: Apr-08-2024